日韩精品免费一区在线观看_亚洲女性午夜在线_亚洲日韩欧美国产动漫第二区_亚洲区不卡顿区在线观看

產品分類

產品展示

您的位置是: 首頁 » 產品中心 »  環氧類地板產品展示

水泥自流平地板EPOXY RESIN SCUMBLING FLOOR
  詳細介紹

適用范圍
1、 瓷磚、乙烯基塑料板、橡膠地板、環氧地板面層的找平層。
2、 倉庫地面,停車場,叉車工作區等地面硬化處理。CT-SZ40可以作為水泥基地面硬化材料,又可和環氧樹脂,PVC等制作復合地板。

APPLlCATlON
1、 Tiles,vinyl plastic sheeting, rubber flooring,the leveling epoxy floor surface layer.
2、 Warehouse ground, the car park,forklifts and so on the ground work hardening.CT-SZ40 cement base can be used as
surface-hardening material, and can epoxy resin,such as PVC production parquet .


性能特點
本數據是在實驗室條件下獲取的,會與施工現場獲得的實際數據有所差異.
FEATURE
The data obtained in laboratory conditions,and the construction site was different from actual data.

產品特點 FEATURE
1、 快速固化            1、Fast Curing
2、 施工簡易            2、Construction simple
3、 體積穩定性          3、Volume stability
4、 自流平性            4、Sexual self-leveling

施工工藝
1、 材料攪拌好后,應立即用鏝刀將材料推敷到上過粘接劑的干燥表面,并讓其自流平,使用釘齒滾壓表面以排出夾帶的氣泡。
2、 材料澆注后應立即進行滾壓,但不要過分滾壓和鏝刀修整凝結的表面。
3、 所要求的施工厚度必須一次澆注完成,為了達到最好的效果,澆注和流平應以連續的過種進行。
PROCESSlNG
1、 Mixing good material, the material should be shared immediately with trowel knife to having deposited the dry adhesive surface, and allow its self-leveling, use nails to bring tooth drum roll from the bubble to the surface.
2、 Rolling immediately after casting materials, but not to roll over and finishing trowel knife condensation on the surface.
3、 The construction required by a casting thickness must
be completed in order to achieve the best results,Continuous casting and flow to the peace process.

           型號MODELS

項目lTEM

CT-SZ20

CT-SZ30

CT-SZ40

抗壓強度Compressive strength

1天

≥8Mpa

≥12Mpa

≥18Mpa

28天

≥20Mpa

≥28Mpa

≥35Mpa

最小厚度Minimum thickness

3mm

3mm

5mm

最大厚度Thickness

5mm

12mm

12mm

可通行時間Accessible Time

20℃~35℃

20℃~35℃

20℃~35℃

人行時間People’s Bank Time

8-12小時8-12hours

8-12小時8-12hours

8-12小時8-12hours

可鋪設施工時間Laying can Time

24小時24hours

24小時24hours

24小時24hours